NEWS

Electromagnetic Valve Of The Selection Basis

2018-06-28
Electromagnetic valve Electromagnetic valve is an electromagnetic control of industrial equipment, is used to control the fluid automation of the basic components, are actuators, not limited to hydraulic, pneumatic. Adjust the direction, flow, speed, and other parameters of the media in an industrial control system. Solenoid valves can be equipped with different circuits to achieve the desired control, and control accuracy and flexibility can be guaranteed. There are many kinds of solenoid valves, different solenoid valves in different parts of the control system to play a role, the most commonly used is the one-way valve, safety valve, directional control valve, speed control valve.

  Electromagnetic valve Solenoid valve selection should first follow the safety, reliability, applicability, economy of the four principles, followed by six aspects of the field conditions (ie, pipeline parameters, fluid parameters, pressure parameters, electrical parameters, Special requirements to choose).

Selection basis:

1, according to the pipeline parameters to select the solenoid valve: diameter specifications (ie DN), interface mode

1) Determine the diameter (DN) size according to the size or flow requirements of the site pipe;

2) interface, general> DN50 to select the flange interface, ≤ DN50 can be freely selected according to user needs.

2, according to the fluid parameters to select the solenoid valve: material, temperature group

1) corrosive fluid: should use corrosion-resistant solenoid valve and all stainless steel; edible clean fluid: should use food grade stainless steel solenoid valve;

2) high temperature fluid: to choose to use high temperature electrical materials and sealing materials made of solenoid valve, but also to choose the type of piston structure;

3) fluid state: large to have a gaseous, liquid or mixed state, especially when the diameter is greater than DN25 must be distinguished;

4) fluid viscosity: usually below 50cSt can be arbitrarily selected, if more than this value, will use high viscosity solenoid valve.

3, according to the pressure parameter selection solenoid valve: principle and structure varieties

1) Nominal pressure: This parameter is the same as the meaning of other general valves, is based on the pipeline nominal pressure to set;

2)Electromagnetic valve  Working pressure: If the working pressure is low, you must use the principle of direct or step direct-acting. The minimum working pressure is 0.04Mpa or more. Direct-operated, step-by-step, pilot type can be used.